How to Fix Windows 10 Srttrail.txt BSOD Error?

Windows never fail in satisfying its users, whether it is a need for a fix or system repair; they always resolve all the issues by releasing updates. However, there are several issues that occurred in Windows that most people cannot fix. Out of various errors of Windows 10, Srttrail.txt BSOD error is the most notorious one that bothers the Windows users. The error leads your PC to freeze between the process of booting and rebooting. Here we have shared a proper, secure, and possible workaround that will fix the Srttrail.txt BSOD error on your PC. Read the blog thoroughly and try using all the fixes to remove this error completely from your PC.



Source:- How to Fix Windows 10 Srttrail.txt BSOD Error?

Srttrail.txt BSOD Error

Every Windows PC is loaded with various components and tools that help to fix issues in the system. Automatic Repair is one of them as it is developed to fix startup errors. Though sometimes it fails in accomplishing its task properly. This failure often seems to be known as the Srttrail.txt Blue Screen of Death error. Soon after it appears, it will show you options for Shutdown and Advanced Repair. If you select the option of the shutdown, then your PC will be stuck in the on-off reboot process. Here in the blog, we are sharing a proper workaround to tackle it and if you are looking to fix this issue, then follow the blog below.

Reasons for Srttrail.txt BSOD Error

There are three main reasons responsible for Srttrail.txt BSOD error:
  • The primary issue that is responsible for almost every error is corrupted files in the Windows Registry due to Malware.
  • The cause can also be a Hardware issue.
  • The error can also occur due to corrupt software installed on your PC.

Troubleshooting methods for Srttrail.txt BSOD error

  • Delete the unused and older version of Anti-virus from your PC.
  • Try using the CHKDSK command.
  • Try Disconnecting all the external devices such as USB.
  • Try switching the laptop components such as battery with a new one.
  • Do a proper System Restore.
  • Disabling the Automatic Startup Repair.
  • Try removing the file that is creating the problem.
  • Try refreshing and resetting your PC system.
  • Do a clean and secure installation of updates.
  • Install an advanced and latest Anti-virus.
  • Repair the Windows Registry.

Solution: Perform a System Restore

When your PC stuck in the loophole chain of rebooting, then after sometimes, your PC shows you the options for the Boot menu. Here are the steps that can restore your system, follow below:
  • Tap on the Troubleshoot option and then select the tab of Advanced options.
  • After that, choose the System Restore option.
  • Press the option of “Choose a different restore point” and then tap on the Next tab.
  • If the instruction for choosing a point for system restore appears on the screen, then select the preferred point.

Solution: Switching Laptop Battery

This step requires you to switch your laptop battery, and there are two possible ways to try this method. Follow below:
  • You can change your old battery with a new one.
  • You can try removing your laptop battery and after a while, place the battery back on your laptop.

Solution: Disconnect External Devices

This is a pretty basic resort to solve this issue, but it worked several times. Here are the steps to execute it:
  • Remove all the external devices from your PC, such as USB, Disk, or speakers.
  • After you disconnect all the external devices, you need to reboot your PC.
  • Now, check whether the error resolves or not.
  • In case the error persists in your device, then connect all the external devices back to your PC.

Solution: Use Command Prompt from Boot menu

This solution will be implemented by using the Command Prompt at the Administration level, so make sure you got a bit of knowledge about it. Here are the ways to use Command Prompt to fix the Srttrail.txt BSOD error. Below:
  • Launch the Troubleshoot by selecting it from the Boot menu.
  • Go to the Advanced tab and select it.
  • Choose Command Prompt from the appeared Window.
  • Input all these commands in the Command Prompt Section:
  • bootrec.exe /rebuildbcd + Enter.
  • bootrec.exe /fixmbr + Enter.
  • bootrec.exe /fixboot + Enter.
  • Wait till the Command successfully launched.
  • Now, you need to copy-paste all of these command ones by one into the Window section. Make sure to press Enter after inputting every Command.

Solution: Using the CHKDSK Command

This method will run a scan that clears all the bugs and errors present in your PC hard disk and if you want to use this method, then follow the steps below:
  • Type” cmd” in the search bar to launch the Command Prompt.
  • Input all these commands in the Command Prompt Window:
  • chkdsk /r C + Enter key.
  • chkdsk /r D + Enter key.
  • After all these commands are successfully launched, reboot your PC and check if the issue persists or not.

Solution: Disabling the Automatic Startup Repair Tool

If you would like to know how to implement this resort, then follow the steps below:
  • Tap the Troubleshoot option from the Boot menu.
  • Now, select the option of Advanced.
  • Choose the Command Prompt option and input all the Command below in the Command prompt:
  • bcdedit /set {default} recovery enabled No + Enter key.
  • Wait till the process completes.
  • Now, Try restarting your device.

Solution: Update Driver Using Safe Mode

The objective of this method is to lead your PC to the Safe Mode, and there, you can perform tasks such as browsing of the Internet and Updating drivers. If you want to use this method, then follow the steps below:
  • Tap the Troubleshoot option from Boot Menu.
  • After that, go for the “Advanced” option.
  • Locate and tap the Startup Settings option.
  • Choose Restart from the menu.
  • Tap the option of “Enable Safe Mode with Networking.”
  • After applying all these steps, your PC will start in Safe mode so you need to update your drivers manually one by one.
  • Visit the PC manufacturer website in order to update your PC drivers.
Chloe Decker is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cybersecurity, cryptography, malware, social engineering, internet, and new media. She writes for Microsoft products at office.com/setup.

Comments

Post a Comment